It is possible to finish complicated procedure of 3-dimensional shoulder by only one time pressing. As well, it is possible to apply to this procedure to the finishing to a shirt in addition to a white coat and a uniform.
Introduction of a Three-Dimensional Shoulder Press(SCPE-4S)
SCPE-4S
Three-Dimensional Shoulder Press
A long-time seller model boasting a prominent result, ensuring the satisfactory finishing deriving from an ideal iron shape.
| Model number | SCPE-4S | ||
|---|---|---|---|
| Product name | Three-Dimensional Shoulder Press | ||
| Power supply | Voltage | AC200 V | |
| Phase | 3 phase | ||
| Frequency | 50/ 60 Hz (common) | ||
| Power consumption | - | ||
| Driving power | 0.4 KW | ||
| Blower | - | ||
| Heater | - | ||
| Steam | Standard use | 0.5 MPa | |
| Max. supply | 0.7 MPa | ||
| Consumption | 15 Kg/h | ||
| Inlet diameter | 1/2 inch | ||
| Outlet diameter | 1/2 inch | ||
| Air | Consumption | - | |
| Working pressure | - | ||
| Inlet diameter | - | ||
| Mechanical dimension | Width | 800 mm | |
| Depth | 1000 mm | ||
| Height | - | ||
| Exhaust diameter | - | ||
| Weight | 250 Kg | ||
